Hakko Electronics Monitouch S8 Series, Hardware Specification

Page: 17 / 79

2-2 1. Specifications
UL/cUL Approval
The S8 series is the UL/cUL-approved product.
For S808:
S808 conforms to the following two standards. (File No.: E185413 (UL60950-1))
•
UL60950-1 Information Technology Equipment - Safety - Part 1: General
Requirements
•
CSA-C22.2 No. 60950-1 Information Technology Equipment - Safety - Part 1: General
Requirements
For S806:
S806 conforms to the following two standards. (File No.: E313548 (UL508))
•
UL508 Industrial Control Equipment
•
CSA-C22.2 No. 142-M1987 Process Control Equipment
UL Listing Application for a System Equipped with the S8 Series
•
The back panel of the S8 series is not approved as an enclosure. For UL listing application, build
the S8 series in the system, and configure an enclosure so that the entire system will be
UL-approved.
•
Use the S8 series indoors only.
•
Mount it on a flat surface so that it will comply with the enclosure type 1.
•
Use a bare cable for wiring the power supply.
•
Use the Class 2 power supply for the 24-VDC power unit.
CE Marking
•
The S8 series complies with following EMC Directives:
EN61000-6-2, EN61000-6-4
•
The S8 series is identified as a class-A product in industrial environments. In the case of use in a
domestic environment, the S8 series is likely to cause electromagnetic interference. Preventive
measures should thereby be taken as appropriate.
Terminal Screw
Power Cable
Screw Size
Tightening
Torque
M3.5 0.8 N•m AWG14 - 16