62
7. Operation (continued)
In addition, the height can be changed and a Z axis lift coordinate can be set only for specific points.
75 mm
0 mm
100 mm
1 pt
2 pt
3 pt
4 pt
Protruding
object
Origin
Z axis lift coordinate
Ex.) When there is a protruding object between the 3rd point and the 4th point
• No Z axis lift is set up to the 3rd point.
• In order to avoid the protruding object when moving from the 3rd point to the 4th point, the
Lifting
Pos.
is set to 75 mm in the Point Edit Screen of the 4th point.
➞
Z axis lift is performed from the 3rd point to the 4th point.
— Note —
• If Z axis lift values are set in both the top screen and the Point Edit Screen, the Z axis lift coordinate
set in the Point Edit Screen will be given priority and be applied.
• To avoid a protruding object between the 3rd point and the 4th point, input a value for the Z axis
lift coordinate of the 4th point.
