17
4-3 Front Panel
JOY STICK
(for X/Y axes)
Easy Input Switch button
JOY STICK
(for Z/θ axes)
START/PAUSE/STOP button
Emergency stop button
POWER button
JOY STICK (for X/Y axes)
Moves the X axis and Y axis manually. For
movement direction, refer to the diagram.
For operation details, see “7-2 JOG Operation”
(p. 56).
JOY STICK (for Z/θ axes)
Moves the Z axis and θ axis manually. For
movement direction, refer to the diagram. For
operation details, see “7-2 JOG Operation”
(p. 56).
Easy Input Switch button
Pressing the Easy Input Switch will set the current
coordinates as the soldering start point or end
point. For operation details, see “7-4 Solder
Installation and Solder Feed Settings” (p. 68).
START/PAUSE/STOP button
Runs, pauses, and stops the program.
For operation details, see “7-6 Running a
Program” (p. 92).
Emergency stop button
Sets the equipment to emergency stop condition.
Turn clockwise to cancel this condition.
POWER button
Button to switch the secondary-side power on
and off.
JOY STICK operation and axis movement directions
— ( )
+
( )
— ( )
— ( )
( )
( )
+
( )
— ( )
X axis
Y axis
Z axis
θ axis