hs dock
Use
Order h49 7144.907-333
57
WARNING
Serious crushing injuries caused by inappropriate
machine movement during installation / removal
of the clamping device!
Machine movements are only permitted in set-up
mode during installation and removal of the
clamping device.
Never reach into the gap.
Watch out for gaps between moving parts.
WARNING
Serious head injuries caused by bending into the
operating area of the machine!
Only bend down into the working area of the ma-
chine if it contains no cutting tools or sharp ob-
jects, or if these are covered.
Never place parts of your body below items in the
working area of the machine that might drop
down.
For installation / removal of the clamping device
on a vertically suspended spindle in the machine,
use a suitable mounting aid if necessary due to
the weight.
WARNING
High level of physical strain due to the weight of
the product or of its components if not trans-
ported properly!
From a weight of 10 kg, use appropriate transport
equipment, lifting gear and lifting tackle.
NOTE
Damage to materials caused by lifting gear left in
the product!
Always remove lifting gear immediately after in-
stallation / removal of the clamping device.
NOTE
Damage to components caused by cooling lubri-
cants with sufficient levels of corrosion inhibitor!
The components made of steel materials must be
protected before the usual oxidation process.
Only ever use cooling lubricants with sufficient
levels of corrosion inhibitor.
