Page 4 of 20
Introduction
Your air conditioning system has been fitted with an advanced and energy efficient thermostat controller. The Smart Temp
thermostat model SMT-700 is able to manage your comfort levels in a number of ways. Your installer will have programmed
your SMT-700 thermostat to specifically fit your needs, the requirements of the building and the air conditioning equipment
connected to it.
If after reviewing this manual there are features or functions that you would consider desirable and that are not active on your
thermostat, please contact your installer or another authorised Smart Temp service agent for advice on adding these functions.
To assist with the clarity of the manual, it has been divided into the following 5 main sections.
•
Residential Programmable Mode.
This section of the manual explains how to use the SMT-700 when installed in a home or apartment. It contains
information on how to program the thermostat, use zone control (if installed) and get the most from your air
conditioning system
•
Commercial Programmable Mode.
When using the SMT-700 thermostat in a commercial building special functions are available. Capabilities such
as after-hours run timers, outside air economy control and other commercial air conditioning management
capabilities are detailed in this part of the user manual.
•
Manual Mode (can be used in either residential or commercial buildings).
Often programming or fully automatic air conditioning control is not required. In these circumstances the
installer will have set the SMT-700 thermostat for manual mode. This mode is the easiest mode to use the air
conditioning system in, but it will not automatically turn you’re A/C system off (or down) at the end of the day.
•
Common Functions.
This part of the user manual explains all the functions and capability that will be available to you regardless of
what mode the thermostat has been put into by the installer
•
Advanced functions.
Your air conditioning system has some very advanced control and energy management capabilities. This part of
the manual will explain these capabilities so you are able to better understand why your air conditioning system
and SMT-700 thermostat is behaving the way it is.
•
Glossary.
This section of this manual will provide you with additional details on the function of buttons, operational modes
and LCD indicators etc.
Residential Programmable Mode
Your residential programmable thermostat is able to be programmed by you, to automatically
control the desired home heating and cooling temperatures.
4 times per day, 7 days per week a separate heating and/or cooling temperature can be
programmed into the thermostat. When the programmed time arrives your thermostat will
automatically use the programmed desired heating and cooling temperature for that time to
automatically control your home air conditioning system. These programmed temperatures
will remain active until the next pre-programmed event arrives later that day (or first event
next day) or until you override these temperatures manually.
The Buttons Explained
On/Off – (Zone Select if function installed)
Quickly press the On/Off button to turn the SMT-700 thermostat On. To turn the SMT-700 thermostat OFF,
press & hold
this
button for 2 seconds until the word “OFF” is displayed in the LCD. If the Zoning function is enabled (see Zone Control on
page 14 ), tap the On/Off button to cycle between Zone 1 only, Zone 2 only then both zones.
