Smart Temp SMT-700 User Manual
Page 7 of 20
Temporary Temperature Override
To make your SMT-700 thermostat even more capable and flexible, it has been provided with a temporary program override
function. This permits you to temporarily change your event temperatures, just for today and only until the next programmed
event starts. For example, you may have guests visiting that would like it a little warmer or cooler than you would normally
have the thermostat set, or you may find yourself at home when normally you would be away from your home, possibly a sick
day for example.
Simply press and hold the up (
S
) or down (
T
) buttons for 3 seconds. The SMT-700 thermostat display will change to show
the word “SET”, and the active set point for the current mode. (Heating, Cooling or Auto modes) as you hold the up (
S
) or
down (
T
) buttons the current set point will change.
If Auto mode is selected, after adjusting the Heat set point wait without touching a button for 3 seconds for the SMT-700
thermostat display to change to show “Cool” and “SET” and your current set cooling temperature. If desired change this value
with the up (
S
) or down (
T
) buttons. Again wait for 3 seconds to exit the temporary overridden programmed mode. The
LCD will now show “Override” and your new temporary setting will be in use until the next programmed event change
occurs.
Should you need to cancel a temporary override, simply press and hold both the up (
S
)
AND
(
T
) buttons for a few seconds.
The word “Override” will disappear from the LCD and your pre-programmed settings will be restored.
Default Program
Wake
Leave
Return
Sleep
Monday 7:00am
Heating 18
8:30am
Heating 10
5:00pm
Heating 20
10:00pm
Heating 12
Cooling 25
Cooling 30
Cooling 25
Cooling 30
Tuesday 7:00am
Heating 18
8:30am
Heating 10
5:00pm
Heating 20
10:00pm
Heating 12
Cooling 25
Cooling 30
Cooling 25
Cooling 30
Wednesday 7:00am
Heating 18
8:30am
Heating 10
5:00pm
Heating 20
10:00pm
Heating 12
Cooling 25
Cooling 30
Cooling 25
Cooling 30
Thursday 7:00am
Heating 18
8:30am
Heating 10
5:00pm
Heating 20
10:00pm
Heating 12
Cooling 25
Cooling 30
Cooling 25
Cooling 30
Friday 7:00am
Heating 18
8:30am
Heating 10
5:00pm
Heating 20
10:00pm
Heating 12
Cooling 25
Cooling 30
Cooling 25
Cooling 30
Saturday 8:00am
Heating 18
8:30am
Heating 18
5:00pm
Heating 20
10:00pm
Heating 12
Cooling 25
Cooling 30
Cooling 25
Cooling 30
Sunday 8:00am
Heating 18
8:30am
Heating 18
5:00pm
Heating 20
10:00pm
Heating 12
Cooling 25
Cooling 30
Cooling 25
Cooling 30
Commercial Programmable Mode
Your commercial programmable thermostat is able to be programmed by you, to
automatically control the desired office heating and cooling temperatures.
2 times per day, 7 days per week a separate heating and/or cooling temperature can be
programmed by you into the thermostat. When the programmed time arrives your thermostat
will automatically use the programmed desired heating and cooling temperature to
automatically control your office air conditioning system. These programmed temperatures
will remain active until the next pre-programmed time arrives or until you override these
temperatures manually or until you activate the 2 hour after hour run timer.
The Buttons Explained
On/Off – After hours Override (or Zone Select if function is installed)
Quickly press the On/Off button to turn the SMT-700 thermostat On where it will run your temperature control program. To
turn the SMT-700 thermostat OFF,
press & hold
this button for 2 seconds until the word “OFF” is displayed in the LCD.
If zoning is enabled - Tap the On/Off button to cycle between Zone 1 only, Zone 2 only then both zones.
If zoning is disabled - Tap this button to toggle the 2 hours after hours run timer on or off.
