Smart Temp SMT-700 User Manual
Page 15 of 20
Glossary
The LCD Explained
Program Event Indicator.
If “Wake”, “Leave”, “Return” or “Sleep” are shown, your SMT-700 thermostat is set as a programmable thermostat. This
mode of operation is perfect for those that live a structured lifestyle. This is fully automatic mode where the residence
occupier can pre program the home temperatures for 24 hours per day, 7 days per week. This is explained on page 4 of this
manual.
2 Program Event Indicator.
Start / Stop or 2 event programming is typically used in commercial buildings where the Air conditioning is simply designed
to turn on at a time (typically in the morning) maintain a single temperature all day then switch off at the end of the day (or
maintain a more economical overnight temperature). The words highlighted on the LCD indicate this mode is set, and whether
the Building A/C system is running. This function is described on page 7 of this manual.
Manual Mode Indicator.
The Sun or Moon symbol (or the lack of any programming information such as “Start”& “Stop”, or “Wake” “Leave” “Return”
& “Sleep”) indicate the SMT-700 thermostat is in “Manual Mode”. This mode is perfect for those who have a less structured
lifestyle. Your SMT-700 thermostat may be set to provide two separate set points, offering a Day temperature and a separate
Night temperature to be set, and easily swapped between the two as needed. Alternatively, a single heating and cooling set
point may be provided. In this case the day & night symbols will not be shown. This function is described in more detail on
page 10 of this manual.
Clock.
The clock displays the time. This time is used by the SMT-700 thermostat in program modes (2 or 4 events) to set the
start/stop or program events. It is important that the clock is set correctly if the SMT-700 thermostat is used in a
Programmable mode. The Clock is NOT used by the SMT-700 thermostat in manual mode – it simply displays the time. See
programming on pages 5 & 8for details about setting the clock.
Day Indicator.
As with the clock described above, the SMT-700 thermostat relies on having the correct day set for its programming functions
to be accurate. If using the programming functions the current day should be set correctly. See programming on pages 5 & 8
for details about setting the clock and day display.
Room / Set Temperature.
This portion of the LCD displays the current room temperature. (Note this temperature may or may not be measured at the
location of the SMT-700 wall controller). In programming mode the current SET (or desired) room temperature is displayed in
this location. The temperature is display in either degree Celsius or degrees Fahrenheit as set by the installer.
