Haier AB25S2SC1FA, Service Manual

Page: 168 / 182

166
(3) If Sw5 is off, some models can self-adaptive the swing
setting and swing angle control.
①
If the angle of the Up/Down swing can be adjusted:
Press SET key to enter the function circulation; the Up/Down
swing icon will
Press the SET key again; the swing
angle will powered on for the time, default angle
will be different according to different modes; if not for the
time, the angle of swing will be displayed as last time). At this
time, swing angle can be adjusted by Up/Down key (when in
intelligent mode, the swing angle is position 1,press up key
to automatic swing, and press down key to position 2).When
pressing Up/Down key to adjust angle, If no operation in 10s,
it will exist angle adjustment and function circulation. Interface
displays the last angle. If you want to set other functions like
sleep function, you need to press SET key again to enter
function circulation.
② If the angle of the Up/Down and Left/Right swing can be
adjusted:
Press SET key to enter the function circulation, and the Left/
Right swing icon will
At this time, press Up/Down key to
switch to Up/Down swing icon When Left/Right swing
icon Press SET key again, the angle of Left/Right
swing will powered on for the time, the default
angle is in position 1, the middle position of Left/Right swing
icon; if not for the
time, the angle will be displayed as last
time).
(4) Pressing Fan key or Mode key can both exit swing function,
with no order sending. When Fan or Mode key is pressed
again, the order will be sent. If the present angle is
pressing SET key will exit the swing function. In the adjustment
process, if there is no key pressed for 10s, swing function
will be exited, and swing angle will execute the
adjusted
angle. In the adjustment process, pressing the ON/OFF key to
power off the wired controller directly, and swing angle is the
adjusted swing angle.
Health up/down function (Only valid for part of
models)
(1) The function can be set through wired controller or remote
controller.
(2) The function circulation is as follows:
(Only when Left/Right swing is valid)
→ (Only when
Up/Down swing is valid)→ → (ventilation function)→
(reserved function)→ → (When it’s time for
cleaning, this icon will involve in circulation) → (the second
8 of 88.8 in the temp. display area displaying A,only valid
for part of
models)→ (the second 8 of 88.8 in the temp.
display area displaying B,only valid for part of models)→
(motion sensing,only valid for part of models) →10°C heating
function(this function only works in the heating mode, only
valid for part of models)
→ health up (Only valid for
part of models) → health down (Only valid for part of
models)
(3) The function is valid only when the angle of Up/Down swing
can be set.
(4) Health
up/down function cannot be set at the same
time. When the latter is set, the former will be automatically
canceled.
(5) This function is ground
setting, no matter on/off,
memory remained.
(6) After the function is set, the angle of Up/Down or Left/Right
swing can be normally adjusted in the main interface. Press
the SET key to enter function circulation. When Up/Down
swing icon
press SET key, and then swing angle
position 1 will Press Up/Down key to adjust the angle.
When the adjusted swing angle is executed, the health
up/down is canceled simultaneously.