100
To use the control box with its normal parameter
setting, use the following procedures. To adjust the
given parameters, see pages 91-104.
1. From the operator’s seat, turn the ignition to the
ON
position.
2. Turn the control box power switch to the
ON
posi-
tion.
3. Turn the
AUTO/MANUAL
switch to
MANUAL
At
this time the display will read “MANUAL” in addi-
tion to other information identifying the control box.
4. Press the individual row switches for up and down
movement. An arrow in the display will indicate
direction of each lift assembly.
P
indicates pres-
sure,
UP
only in “o” type machines, and
UP
and
DOWN
both in “p” and “c” type machines.
5. If the
AUTO/MANUAL
switch is left in the
AUTO
position when the unit is first started, the display
will tell you to
SELECT
MANUAL
. After you have
selected
MANUAL
switch back to the
AUTO
posi-
tion.
6. To override the system, press the desired
UP
switch to raise the attachment. When the switch is
released, the system will go back into the
AUTO
mode.
7. If the ignition is left on and the
AUTO/MANUAL
switch is left in the
AUTO
position, the down coils
on the electro-hydraulic valve will lose power after
45 seconds. To re-activate, move the
AUTO/
MANUAL
switch from
AUTO
to
MANUAL
and
back to
AUTO
.
8. The control box is set up with a feature so that if a
unit loses contact during operation in the
AUTO
mode, the unit will automatically rise. If this should
happen, switch to the
MANUAL
mode and deter-
mine the cause for malfunction.
1
LIFT
ON
OFF
AUTO
MAN.
DEPTH CONTROL
TASSELTROL / LS
SYSTEM 12
S. I. E. level C7.3
S. I. E. level C7.3
S. I. E. level C7.3
S. I. E. level C7.3
SELECT MANUAL
SELECT MANUAL
SELECT MANUAL
SELECT MANUAL
CABLE BOX sn: C98ØØ9
CABLE BOX sn: C98ØØ9
CABLE BOX sn: C98ØØ9
CABLE BOX sn: C98ØØ9
PAR=c B1 R2 T3 L6 DØØ
PAR=c B1 R2 T3 L6 DØØ
PAR=c B1 R2 T3 L6 DØØ
PAR=c B1 R2 T3 L6 DØØ
5
LIFT
6
LIFT
2
LIFT
3
LIFT
4
LIFT
FIG 100-1
FIG 100-2
FIG 100-3
P
P
P
P
ON MAN.
ON MAN.
ON MAN.
ON MAN.
U
U
U
U
V.
SYSTEM PROGRAMMING
A. CALIBRATION
B. HAGIE TASSELTROL®/LS SYSTEM 12™ (DETASSELER)
