IV.
OPERATING SYSTEMS
F. DETASSELING SYSTEM
73
FIG. 73-1
FIG. 73-2
To immediately achieve the recommended engine RPM and make
the hydraulic detasseling motors available for use, you must over-ride
the system.
This is not recommended for use with anything other
than the detasseling system!
To override the system:
1. Take the engine up one bump on the throttle switch (fig 73-1, item
A) to 1800 RPM.
2. With the hydrostatic lever in neutral, press both the red and green
buttons (fig. 73-1, item B) at the same time. This will bump the en-
gine RPM directly to the recommended 2500.
To disengage the override, reduce the engine RPM by taking the
engine down one bump on the throttle switch. A decrease in engine
RPM will automatically disengage the override.