34
IV.
OPERATING INFORMATION
CAB OPERATION CONTINUED
“ALL UP” and “ALL HOLD” Function
This function can be used to raise or lower all row
units at the same time. The switch to control this option is
located on the hydrostat control handle (fig. 4.23). All the
row units will move up when the switch is pressed upward
and will lower when the switch pressed downward.
The parameters for dwell on the up move can be set
to 0, 5, 10, 15, 20, or 25 seconds. The heads will move
up in this amount of time without having to hold the switch
up. All heads will hold this position when the parameter is
reached. To resume automatic depth control, press the
switch down.
To program the “ALL UP” and “ALL HOLD” function:
1. Put the “AUTO/MANUAL” switch to “AUTO.”
2. Put the “ON/OFF” switch to “ON.”
3. Press the “UP” button under “PAR.”
4. Press the “UP” button under “D” to set the dwell time.
5. After selecting one of the dwell time choices, press
any of the down switches.
6. To escape the parameter mode, press down a sec-
ond time to return to the original screen (to save this
setting, switch the “AUTO/MANUAL” toggle to
“MANUAL”).
FIG 4.25
PRESS UP TO CHANGE
PARAMETERS
PRESS DOWN TO QUIT
PAR=s B1 R2 T3 L6 DØØ
FIG 4.24
1
LIFT
ON
OFF
AUTO
MAN.
DEPTH CONTROL
TASSELTROL / LS
SYSTEM 12
S. I. E. level 2.1
SELECT MANUAL
CABLE BOX sn: C98ØØ9
PAR=s B1 R2 T3 L8 DØØ
5
LIFT
6
LIFT
2
LIFT
3
LIFT
4
LIFT
FIG 4.23