The control box (fig. 4.14) has three programmable parame-
ters and each has four different value settings. Your programma-
ble control box is factory preset with the following parameter de-
faults:
BOTTOM PARAMETER – B1
See page 37 to reprogram the
bottom parameter.
RESPONSE PARAMETER – R2
See page 35 to reprogram
the response parameter.
TOP PARAMETER – T3
See page 36 to reprogram the top
parameter.
These parameters will always be displayed until the control
box is reprogrammed. Once reprogrammed, the values for the
parameters will appear in the window of the control box. The new
parameters will maintain their value for approximately a two week
period. If the unit is not used within this time frame, the parame-
ters will automatically return to the normal settings.
To program the unit, first select the response parameter
(page 35). If further adjustment is required for top and/or bottom
parameters, see pages 36 and 37.
31
IV.
OPERATING INFORMATION
TASSELTROL
®
CONTINUED
SETTING UP THE TASSELTROL
®
/LS SYSTEM
FIG 4.15
1
LIFT
ON
OFF
AUTO
MAN.
DEPTH CONTROL
S. I. E. level 2.1
SELECT MANUAL
CABLE BOX sn: C98ØØ9
PAR=s B1 R2 T3 L8 DØØ
5
LIFT
6
LIFT
2
LIFT
3
LIFT
4
LIFT
FIG 4.16
1
LIFT
ON
OFF
AUTO
MAN.
DEPTH CONTROL
5
LIFT
6
LIFT
2
LIFT
3
LIFT
4
LIFT
PRESS UP TO CHANGE
PARAMETERS
PRESS DOWN TO QUIT
PAR=s B1 R2 T3 L6 DØØ
FIG 4.14
