18
III.
PREPARING TO OPERATE
ATTACHING CUTTERS CONTINUED
Blade Rotation Left of Operator
Hydraulic hoses on cutter heads should
be hooked up so blades on heads mounted
left of operator rotate according to figure 3.21
and figure 3.22 (counter-clockwise from
above). Refer to 2101 SPRAYER/
DETASSELER Parts Manual for correct hard-
ware, hose lengths, and hydraulic schematic.
FIG 3.22
fro
nt
fro
nt
THREE-HEAD SERIES
FIG 3.21
fro
nt
TWO-HEAD SERIES
1
NOTE:
Care should be taken when installing check
valve (fig. 3.21, item 1) on cutter motor so
the flow arrow is oriented correctly (either
two-head or three-head series).
IMPORTANT:
Case drain hoses must be installed
correctly on cutter motors to prevent
motor damage. Refer to parts manual.
