TX100 USB
58
6T7639a
The following screen is displayed:
The Auto screen is displayed at the end of the update:
The new installation with the Learning type, can now:
-
Be validated definitively so as to have the same status as a normal installation.
-
Be used to resume the Learning, to correct possible errors.
9.4.5 Resume
Resuming allows to continue learning an installation of the Learning type. Resuming the learning allows correcting possible errors
which appeared during the first learning.
!
Go to Screen
/ Menu / Instal. Management / Learn Installation
The Learn installation screen displays:
• the total number of RF products found.
• the total number of TP products found.
• the Error lines indicate the number of products which are only partly learnt.
• Press the Retry screen key to re-start the procedure. This option is interesting
when errors occur.
• Press the
screen key to confirm.
An Update screen is displayed.
At this point, the installation has been completely learnt, but it is not validated yet. The
Prog mode is not accessible.
• Press the Visu screen key to display the inputs, the outputs, the functions and the
links.
• Select Resume using the
or
key.
• Press the
key to confirm your selection.
