TX100 USB
27
6T7639a
5.4.4 Learning of the installation with manual numbering of the outputs and inputs
• Proceed according to the beginning of the above described procedure Learning
with automatic numbering of the outputs.
• When the Output numbering screen is displayed, press the YES screen key to
start the learning procedure with manual numbering of the outputs.
At the end of the Installation learning phase, all TP products and all bidirectional RF
products were detected. No number has been assigned.
• Press the screen key Num
• Press the Inputs screen key to start the inputs numbering procedure.
• Press the
screen key to confirm.
• Activate each input. (The whole procedure to follow to number the inputs is
described in section 5.4.2 of this document).
Press the Outputs screen key to start the outputs numbering procedure.
A screen similar to the opposite is displayed.
The output symbol is displayed with a non-defined number.