TX100 USB
29
6T7639a
At any time, the automatic numbering mode can be selected in order to finalize the numbering of the outputs.
Go to the screen Menu / Advanced functions / Output numbering
!
Inputs can be numbered all along the configuration of the products. Only the numbered inputs are displayed.
In order to be able to create a link between an input and an output, it is necessary to assign a function to the input.
After the Product learning and Input / output numbering phases, the Prog screen is similar to the screen below.
The left part of the screen concerns the inputs.
The right part of the screen concerns the outputs.
• Select Output numbering.
• Press the
key to confirm your selection.
• Select
Automatic
.
• Press the
key to confirm your selection.
A Write running... wait screen is displayed. The numbering of the outputs not numbered
yet is finished automatically.
Press the
key to switch back to Prog mode.
5.5 Assigning a function to an input
Programming mode
Function of the screen key: Filter
selection
Output symbol
Output no. (Output 1)
Output type: RF or TP (here: TP)
Function of the output (here:
Lighting ON/OFF output)
Total number of outputs
Function of the screen key: go to the
Num mode
Input symbol
Input no. (here: Input 3)
Input type: RF or TP (here: RF)
Function of the input (the question
mark here shows that this input
does not have a function yet)
Total number of inputs
Function of the screen key: go to the
Auto mode
