59
VERTICAL ANCHORING
For safe installation, use the anchoring elements for vertical work
(see the anchoring
accessories available on pages 9 and 10 and in the sales documentation and on our website
The installation of the hoist ends with its attachment to the building or scaffolding structure
depending on the configuration of the site.
GENERAL RULES FOR VERTICAL ANCHORING:
- A hoist is said to be vertical when the angle that the ladder structure describes with the vertical
axis is
≤3°
- The hinged base ladder shoes must always be anchored to the ground using dowels or fixing
plugs adapted to the type of support. The dowels or fixing plugs must have a minimum Ø of 12
mm and pass through the holes provided for this purpose in the hinged base shoes. The
anchoring to the ground must be solid and durable.
- Anchoring on each floor of the building and at the top end of the ladder using:
•
enclosure clamp + 2 fixing clamps
•
balcony clamp + 2 fixing clamps
•
mooring cy 1 tube Ø 1 orthogonal c 2 VE fixing clamps
The ladder can be supported directly against the square tubes of the clamps.
- Anchoring on each floor of the scaffolding and at the top end of the ladder using:
•
1 tube Ø49x3mm
•
2 orthogonal couplers
•
2 VE fixing clamps
The ladder can be supported directly against the round tubes of the scaffolding.
In all cases, refer to the shoring chart below.
Summary of Contents for 312175001
