HAEMMERLIN 312175001, Instructions For Use Manual

Page: 28 / 88

28
INSTALLATION OF THE GUIDE HOOKS FOR THE UPPER LIMIT
ELECTRICAL CABLE
The guide hooks are used to guide the electrical cable of the upper limit switch along the ladder mat of the
hoist to prevent the cable from hanging freely in the void and being damaged, crushed or cut.
The shape of the guide hooks allows them to be easily and quickly attached to the rings of the quick bolts
at the connections between ladders and at the knee joints.
A set of 3 guide hooks is supplied with each hoist. As a rule, a set of 3 hooks is sufficient for base heights
between 10 and 11m. When the total height of the lift exceeds 11m and depending on the inclination, as
many hooks as necessary must be added to ensure optimal guidance of the upper limit switch cable.
These hooks are available in sets of 3 pieces under the article code 312703001.
Installation of hooks:
- Bring the guide hook close to a quick bolt ring at the ladder connections or knee joints.
- Engage the spiral end of the hook in the ring of the quick bolt (1)
- Then turn the hook 180° so that the spiral is screwed around the ring (2)
- Release the hook, it is now in place and ready to receive the electric cable to be guided (3)
-
1
1
2
3