HAEMMERLIN 312175001, Instructions For Use Manual

Page: 62 / 88

62
Anchoring the ladder structure against the enclosure clamps:
- After the ladders have been slotted and locked together with the quick bolts, the ladder mat is
pressed against the support tubes of the clamps previously installed on the various floors of the
building (1).
- Position the ladder in relation to the façade, taking into account the accessory that will be used, in
order to guarantee free passage for the mobile equipment (2).
- Stabilise the ladder mat against the support tubes of the clamps on each floor with 2 fixing clamps
per enclosure clamp (3), then lock the assembly by tightening the fixing clamps (4).
The risk of sliding must be compensated for by tightening the clamping handle as described above, but also
by anchoring the fixed spur of the enclosure clamp with Ø8mm dowels or fixing plugs adapted to the type of
support.
1
1
1
3
3
2
2
2
4
4