HAEMMERLIN 312175001, Instructions For Use Manual

Page: 35 / 88

35
DOUBLE TIPPING SKIP
The tipping skip is used to transport and dump concrete, sand and rubble of all kinds automatically up and
manually down. Care must always be taken to ensure that the material being transported cannot fall.
Installation of the skip:
- Fasten the tipping crossmember to the trolley (1) with the brace, the upper limit bumper brace, 4
screws and 4 bolts. Before tightening the bolts, make sure that the braces are positioned under the
trolley frame and that the upper limit bumper brace is positioned on the right (see detailed image D).
- Then hook the tray/ subframe onto the tipping crossmember (2) using the fastening shaft and
secure with the locking pin.
Before installing the tipping ramps, check that the end of the ladder is supported. If this is not the case, a
pair of headboard props must be installed first (see page 69).
Useful dimensions
2
1