HAEHNE
Elektronische Messgeräte GmbH · Heinrich-Hertz-Str. 29 · D-40699 Erkrath Germany · Telefon 0211/9 25 91-0 · Fax 0211/9 25 91-20
http://www.haehne.de
Email: [email protected]
HAEHNE
Elektronische Messgeräte GmbH · Heinrich-Hertz-Str. 29 · D-40699 Erkrath Germany · Telefon 0211/9 25 91-0 · Fax 0211/9 25 91-20
http://www.haehne.de
Email: [email protected]
DCX
38 Block A
Block
Channel 1...8
Number
Level
Configuration of 8 Anybus analog outputs
6.3.9. Anybus Outputs (Block A)
4 A x 0 I
Signal source
selection
3 A x I I
Filter time
Range:
2048…32768
Standard: 20480
Output value of channels x at 100% input signal
3 A x I 2
Scaling at nominal
signal (100%)
(Block A)
Anybus analog output [1...8]
01...98
4Ax01
3Ax11
Filter
time
3Ax12
Scaling at nominal
signal (100%)
Anybus CompactCom Modul x
The parameters of chapter 6.3.10. Limit switch (Block C) are described in the Reference Manual
Range:
0; 01…98
Standard: 5x (x: as channel)
0:
Anybus Analog output x OFF
This "Input 1 word" module in the configuration is not
applied (chapter 5.3.)
1. Digit: block
2. Digit: channel
Tabular overview of signal sources in chapter 8
Signal source for Anybus analog outputs x
Range:
1…9999
Designation in ms
Standard: 100
Value of the moving average in msec.
From the value 52 onwards an additional peak suppression
function is activated. However, local peaks do not enter into the
average calculation.
