HAEHNE
Elektronische Messgeräte GmbH · Heinrich-Hertz-Str. 29 · D-40699 Erkrath Germany · Telefon 0211/9 25 91-0 · Fax 0211/9 25 91-20
http://www.haehne.de
Email: [email protected]
11
Operation
4.2. DCX Operation
After applying power on the DCX starts with the start screen.
4.2.1. Modification of Displayed Values
The displayed values are changed by directly pressing the corresponding field
By pressing the first display position, as an example,
the following parameter selection screen can appear:
The values for the data source, the filter setting, scaling and unit are presented here.
The field "y" displays the number of changed parameters. If no parameter is changed, then this value is 0.
By pressing the start screen always appears.
Menu Min Max Func
?
x
51: xxxxxxxx
52: xxxxxxxx
53: xxxxxxxx
54: xxxxxxxx
55: xxxxxxxx
56: xxxxxxxx
57: xxxxxxxx
58: xxxxxxxx
y
Position 1 (001..)
Source: 51
Scale: xxxxx
Filter: xxxx
Unit: xx
Actual Value: xxxxxxx
DO
DI
Menu Min Max Func
?
x
„Digital“ Inputs
„Digital“ Outputs
Display range of values/
configurated as 2, 4, 6
or 8 display
Adjustment mode/
By selecting Level, Block,
channel and parameter
number the desired
parameter is set
Activating peak value display
Activating quick function
