HAEHNE
Elektronische Messgeräte GmbH · Heinrich-Hertz-Str. 29 · D-40699 Erkrath Germany · Telefon 0211/9 25 91-0 · Fax 0211/9 25 91-20
http://www.haehne.de
Email: [email protected]
HAEHNE
Elektronische Messgeräte GmbH · Heinrich-Hertz-Str. 29 · D-40699 Erkrath Germany · Telefon 0211/9 25 91-0 · Fax 0211/9 25 91-20
http://www.haehne.de
Email: [email protected]
DCX
14 Operation
Press "Func." on the initial screen, quick functions are called. These are the calibration functions for the zero
point (tare) and the gain for each amplifier separately selectable.
4.2.3. Quick Function
Page numbering (current page / number of pages "1/3")
"P <" and "P>" switches between the sides.
By selecting an amplifier the following page is displayed:
Values of Level 3 are "Zero" (zero adjustment
value) and "Gain" (adjustment value for a defined
load)
Here, too, shows the as "y" designated field the number of changed parameters.
If no adjustments were made, this value is 0.
With "Activate" the appropriate activation page is called.
(This additional step is used to avoid incorrect entries.)
Actual value
With "Activate", the corresponding adjustment process
is started.
"Esc" to exit the page without adjustment.
Esc
Calibrate Amplifier 1 Zero
Actual Value: xxxxxx
Activate
P<
P>
x
Function
Calibrate Amplifier 1
Calibrate Amplifier 2
Calibrate Amplifier 3
1/3
Esc
y x
Calibrate Amplifier 1
Zero
35111: xxxxxx
Activate
Gain
35121: xxxxxx
Activate
xxxx
Actual value
