HAEHNE
Elektronische Messgeräte GmbH · Heinrich-Hertz-Str. 29 · D-40699 Erkrath Germany · Telefon 0211/9 25 91-0 · Fax 0211/9 25 91-20
http://www.haehne.de
Email: [email protected]
HAEHNE
Elektronische Messgeräte GmbH · Heinrich-Hertz-Str. 29 · D-40699 Erkrath Germany · Telefon 0211/9 25 91-0 · Fax 0211/9 25 91-20
http://www.haehne.de
Email: [email protected]
DCX
24 Parameter Description
6.1. Parameters of Displayed Values
Position 1...8
Range:
1 …9999
Designation in ms
Standard: 50
Value of t
he moving average
1: Filter function not in operation
From the value 52 onwards an additional peak suppression
function is activated. However, local peaks do not enter into the
average calculation.
Filter time
0 0 x 0 4
Nummer
Unit
0 0 x 0 5
Selection: NO (no unit / standard)
%
N
kN
MN
lbs
kg
Direct unit selection for actual item
Range:
01 …98
Standard: 5x (x: as position)
1. Digit: block
2. Digit: channel
Tabular overview of signal sources in chapter 8
Signal source for this display position.
Signal source
0 0 x 0 I
Range:
10 …100 000
Standard: 100 (display shows %)
Displayed value in case of 100 % signal of the selected signal
source, other values correspondingly proportional.
Scaling
0 0 x 0 2
Range:
0 …6
Standard: 0 (no decimal point display)
Point position starts right with 1
Is set on the same side as the scale
with direct selection of the point position.
Decimal point
0 0 x 0 3
