02
03
04
05
06
07
Fit first two parts
L
from the frame
34-07
on each side
of the lower mast deck, as shown. Fix in place with a
little superglue.
Fit the two remaining parts
L
in the forward corners
of the bridge deck and glue in place.
Cut the first storage box
M1
from frame
34-08
. Check
the fit on the starboard side of the lower mast deck,
near part
L
. Make sure that the box does not cover the
hole on the deck (circled). Glue in place.
Cut the second storage box
M1
from frame
34-08
and
fit it in place on the other side of the lower mast deck,
near the oval opening. Make sure you have the box
the right way round: in this photo, the pegs on the
base are located on the left, as indicated by the arrow.
The four storage units
M2
are fitted in pairs behind
the large opening. Take care not to remove the
locating pegs when cutting from the frame. Make
sure that they are vertically aligned and glue in place.
Glue part
M-3
in place next to box
M-1
on the lower
mast deck.
M1
L
L
L
L
L
M1
L
M2
M2
M3
M1
10
10
AGORA
MODELS
PB
AGORA
MODELS
