Hach NA5600 sc Na+, Maintenance And Troubleshooting Manual

Page: 24 / 390

Option Description
OUTPUT STATUS Shows the signals (mA) at the 4–20 mA outputs.
SIMULATE
MEASUREMENT Enters an analyzer reading on a selected channel to do an output test. The
simulation stops after the user exits the screen.
SELECT SOURCE —Selects the
analyzer. SET PARAMETER —Selects the channel. SET SIM VALUE —Sets the
analyzer reading.
Show the analyzer information
To show the analyzer information that follows, push menu , then select VIEW DATA > ANALYZER
DATA. Refer to Table 2 .
Table 2 Analyzer data descriptions
Item Description
DATE/TIME Current time (24-hour format) and date identified in the settings
NAME Name of analyzer
TYPE Type of analyzer
AMBIENT TEMP Ambient temperature of the analyzer
CONDITION SOL LEVEL Solution level of the conditioning solution bottle
REACT SOL LEVEL Solution level of the reactivation solution bottle
STANDARD LEVEL Solution level of the calibration solution bottle
KCL LEVEL Solution level of the KCl electrolyte reservoir
LAST REACTIVATION Date the last auto reactivation was done
LAST CAL Date the last calibration was done
LAST SERVICE Last service date
SOFTWARE VERS Software version installed
DD FIRMWARE Version of the device driver firmware installed
DD CONTENT Version of the data content of the device driver
SCRIPT VERSION Version of the script file directory block
SCRIPT CONTENT Version of the script file directory content
MEAS_CONTROL SW REV Revision of the measurement control software installed
SERIAL NUMBER Serial number of analyzer
Show the analyzer status and system data
To show the current analyzer status, Modbus status, system data or I2C data, do the steps that
follow:
1. Push diag .
2. Select an option.
Option Description
CURRENT
STATUS OPERATION —Current measurement mode. SAMPLE CHANNEL —Current sample
channel. STEP STATUS —Current step in the measurement cycle. STEP TIME —Step
time remaining. MINUTES LEFT —Minutes left in current step. COMPLETION —%
completed of the measurement cycle.
24 English