Hach Ultra ORBISPHERE 510, Operator'S Manual

Page: 19 / 144

Orbisphere 510/511/512 Analyzers - Installation 13 of 138
Operator Manual
ORBISPHERE
1.3.2 Wall Mounting
Fig 1-2:
Wall Mount Bracket
1.3.3 Pipe Mounting
Attach the U bracket provided
to the wall with two screws (not
provided).
Tilt the instrument slightly
backwards to align the bracket
pins and the insertion slots,
and slide the instrument onto
the bracket as shown.
Insert the 2 locking screws with
washers through the side slots.
Adjust the instrument angle for
better screen vision, and lock
both side screws.
Fig 1-3:
Pipe Mount Diagram
Assemble the pipe mount bracket to the U-
bracket, using the two screws provided
Attach this assembly to the pipe using two
clamps (not provided) as shown on the left
The rest of the procedure is similar to the
wall mount version, pictured above.
Slide the instrument onto the bracket.
Insert the 2 locking screws with washers
through the side slots.
Adjust the instrument angle for better
screen vision, and lock both side screws.