Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Use Manual
Hot Press PM-1056/160
Author:
A.T.
INSTALLATION
Edition:
09/2004
Page
C-2
Replaces:
Hot Press type PM-1056/160
SECTION C.1
PREPARATION OF WORK SITE
ATTENTION
The press must be placed on a floor or support of suitable size that is able to take the weight
and bulk of the equipment.
The machinery must be placed in a room with sufficient lighting, avoiding dazzling and
stroboscopic effects. Personnel entrusted to control the machine must be able to work under
normal light conditions (usually provided by neon lights fitted on the ceiling). If the lighting
level is insufficient, the Customer must provide an additional lighting system since the
machinery is not supplied with its own lighting system for the operational zone.
The work area must be well ventilated and/or have an air cycling and emission system
compliant with the law of the country of installation, such as to ensure the operator is working
under the proper working conditions.
The free space around the machine must be sufficient for work and maintenance operations
and permit access all workstations taking account of the size of the pieces to be worked on.
The Customer must provide all the sources of energy required for electrical power and
compressed air as indicated in
TECHNICAL CHARACTERISTICS OF THE PRESS
Ensure there is sufficient operational space around the press.
Make sure that there is a properly stocked first aid box on site nearby.
ATTENTION
The main switch M.S. of the electrical panel must be in its «OFF» position when the machine
is being connected up.
Summary of Contents for PM-1056/160
Page 2: ......
