Habasit PM-1056/160 General Manual Use And Maintenance Download Page 54

Page: 54 / 82

Habasit Italiana S.p.A.

Vittorio Veneto 31029 (TV)

Tel.: ++39(0)438.9113

Fax. ++39(0)438.200545

Use Manual

Hot Press PM-1056/160

Author:

A.T.

OPERATION

Edition:

09/2004

Page

D-14

Replaces:

Hot Press type PM-1056/160

NOTE

If not all the water is removed from the cooling circuit this may jeopardize the next joining

cycle with resulting defective joints.

ATTENTION

The heated water can produce steam at 180° at a pressure of about 10 bars.

For rapid heating without energy wastage, heat the hot press with it always closed.

Section. D.5.5

OTES ON USE

ATTENTION

Never put the pressure chamber under pressure if the press has not been properly closed.

Do not exceed the maximum permitted pressure of 3 bars.

Section. D.5.6

ECHNICAL ASSISTANCE

Our experts will be available for you to consult on the use of the press. If you have any

technical queries regarding the working and the status of the welding device, contact the

manufacturer at the address indicated in this manual.

Summary of Contents for PM-1056/160



















































































Search results

Summary of Contents for PM-1056/160

Reviews:

Related manuals for PM-1056/160

Brands by name

Popular brands

Habasit PM-1056/160, General Manual Use And Maintenance

Search results

Summary of Contents for PM-1056/160

Reviews:

Related manuals for PM-1056/160

Brands by name

Popular brands