Habasit PM-1056/160 General Manual Use And Maintenance Download Page 14

Page: 14 / 82

Habasit Italiana S.p.A.

Vittorio Veneto 31029 (TV)

Tel.: ++39(0)438.9113

Fax. ++39(0)438.200545

Use Manual

Hot Press PM-1056/160

Author:

A.T.

REGULATIONS AND GENERAL WARNING NOTES

Edition:

09/2004

Page

A-6

Replaces:

Hot Press type PM-1056/160

SECTION A.5

VISUAL SIGNS

ATTENTION

Visual signs – indicator notices – are applied to the machine. A knowledge of their meaning

helps ensure that safety regulations are observed, prevent accidents, and assure good

operation.

All people approaching the machine must have a clear understanding of the symbol and its

meaning. Non observance may cause accidents entailing damage to personnel and to the

machine.

Section. A.5.1

IGNS

The signs affixed to the machine are shown below; the following signs may be located on the

machine; such signs enable staff operating or working on the machine to know about and so

prevent the dangers and risks of not observing the principal safety rules.

Summary of Contents for PM-1056/160



















































































Search results

Summary of Contents for PM-1056/160

Reviews:

Related manuals for PM-1056/160

Brands by name

Popular brands

Habasit PM-1056/160, General Manual Use And Maintenance

Search results

Summary of Contents for PM-1056/160

Reviews:

Related manuals for PM-1056/160

Brands by name

Popular brands