Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Use Manual
Hot Press PM-1056/160
Author:
A.T.
REGULATIONS AND GENERAL WARNING NOTES
Edition:
09/2004
Page
A-5
Replaces:
Hot Press type PM-1056/160
SECTION A.4
GUARANTEE CONDITIONS
Section. A.4.1
G
UARANTEE TERMS AND VALIDITY
The manufacturer guarantees the product against any faults either in materials or in
workmanship, for 1 (one) year from the date of installation of the product at the Buyer’s
premises. In this case, the manufacturer shall limit itself to replacing or repairing any part or
parts returned to the manufacturer, which was/were found to be faulty.
The manufacturer may, at his own discretion, also replace or repair any part or parts of the
product being repaired that is/are felt to be defective.
The manufacturer shall have the sole right to decide if such parts should be repaired or
replaced.
The manufacturer shall not be liable in any other case for collateral or incidental damage.
The guarantee does not apply to plant that has been repaired by third parties that have NOT
been authorized by the manufacturer.
Spare parts supplied by the manufacturer must be used. Any deviation from this rule will
mean the guarantee will not apply
Section. A.4.2
W
HEN THE GUARANTEE CAN BE VOIDED
The manufacturer's guarantee for the plant and associated equipment may be annulled as a
result of improper intervention or repairs.
The manufacturer's guarantee for the equipment may be annulled as a result of the use of
improper materials or materials not supplied by the manufacturer.
This manual’s instructions must be observed or the guarantee cover will be lost.
IMPORTANT
HABASIT CANNOT BE HELD RESPONSIBLE FOR ANY DAMAGE CAUSED BY IMPROPER,
INCORRECT AND UNREASONABLE USE OF THE MACHINE.
Summary of Contents for PM-1056/160
Page 2: ......
