Habasit Italiana S.p.A.
Vittorio Veneto 31029 (TV)
Tel.: ++39(0)438.9113
Fax. ++39(0)438.200545
Use Manual
Hot Press PM-1056/160
Author:
A.T.
INSTALLATION
Edition:
09/2004
Page
C-4
Replaces:
Hot Press type PM-1056/160
Section. C.2.2
MOBILE
OPERATION
HANDLING
To make transportation of the press easier it can be dismantled as indicated:
If connected, disconnect the various electrical, water and air connections in order
Disassemble the upper part of the press (1) (the support with the heating element)
Disassemble the lower part of the press (6) (the support with heating element)
Disassemble the sheet steel heat stabilizer with locking device (8)
Use suitable handling and transport equipment capable of dealing with the object's weight,
while taking care during the transportation itself.
Reassemble the press and ensure that its mechanical parts are functioning properly
Reconnect the power while taking when handling electrical power sources close to the water
used in the cooling system.
The press can also be moved as a single unit, in which case the following must be
carried out:
If connected, disconnect the various electrical, water and air connections in order
Use transportation equipment of the correct capacity for the weight of the object to be moved
Verify that the press and all its mechanical parts have not been damaged in transit and that
all are working correctly
Reconnect the power while taking when handling electrical power sources close to the water
used in the cooling system.
ATTENTION
ALL OPERATIONS MUST BE PERFORMED BY PROPERLY TRAINED AND EXPERT
PERSONNEL.
ATTENTION
ALL HANDLING OPERATIONS OF THE PRESS MUST BE PERFORMED SLOWLY WITHOUT ANY
SUDDEN MOVEMENTS, TO AVOID DAMAGING PERSONS AND THINGS.
Summary of Contents for PM-1056/160
Page 2: ......