9-2
View
Any view
Default Level
2: System level
Parameters
mesh-profile mesh-profile-number
: Mesh profile number, which ranges from 1 to 32.
radio radio-number
: Radio number, which ranges from 1 to the number of maximum radios supported
by the AP.
peer-mac-address mac-address
: MAC address of a peer MP.
all
:
All the links formed by the AP.
Description
Use the
display wlan mesh-link
command to display WDS link information.
This command is used on an MP.
Examples
# Display the information of all WDS links.
<Sysname> display wlan mesh-link all
Peer Link Information
--------------------------------------------------------------------------
Nbr-Mac BSSID Interface Link-state Uptime(hh:mm:ss)
--------------------------------------------------------------------------
000f-e274-3840 000f-e276-3240 WLAN-MESHLINK621 Active 0:5:16
000f-e274-3841 000f-e276-3240 WLAN-MESHLINK622 Active 1 Day,0:1:16
000f-e274-3842 000f-e276-3240 WLAN-MESHLINK623 Active 2 Days,0:0:16
--------------------------------------------------------------------------
Table 9-1 display wlan mesh-link
command output description
Field
Description
Nbr-Mac
MAC address of the neighbor radio on the link
BSSID
MAC address of the radio
Interface
WLAN mesh interface on the link
Link-state
State of the link
Uptime(hh:mm:ss)
Time for which the WDS link has been up
display wlan mesh-profile
Syntax
display wlan mesh-profile
{
mesh-profile-number
|
all
}
View
Any view
Default Level
2: System level
