manualshive.com logo in svg

H3C WA Series, Command Reference Manual

Share
Download
H3C WA Series Command Reference Manual Download Page 77

 

10-2 

a-msdu enable 

Syntax 

a-msdu enable 

undo a-msdu enable 

View 

WLAN radio interface view 

Default Level 

2: System level  

Parameters 

None 

Description 

Use the 

a-msdu enable

 command to enable the A-MSDU function for the radio. 

Use the 

undo a-msdu enable

 command to disable the A-MSDU function for the radio. 

Support for the command depends on the device model. 

By default, the A-MSDU function is enabled on an 802.11n radio. 

This command is only effective on 802.11n radios. If you change the radio type of an 802.11n radio, the 

default setting for this function of the new radio type will be restored.  

Currently, the AP can only receive A-MSDU frames. 

Examples 

# Disable the A-MSDU function for radio 1/0/1. 

<sysname> system-view 

[sysname] interface WLAN-Radio 1/0/1 

[sysname- WLAN-Radio1/0/1] undo a-msdu enable 

beacon ssid-hide 

Syntax 

beacon ssid-hide 

undo beacon ssid-hide 

View 

WLAN service template view  

Default Level 

2: System level 

Parameters 

None 

Description 

Use the

 beacon ssid-hide 

command to disable the advertising of Service Set Identifier (SSID) in the 

beacon frames. 

Use the 

undo beacon ssid-hide

 command to restore the default configuration. 

By default, SSID is advertised in the beacon frames. 

Summary of Contents for WA Series










































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands