10-26
wlan service-template
Syntax
wlan service-template service-template-number
{
clear
|
crypto
}
undo wlan service-template service-template-number
View
System view
Default Level
2: System level
Parameters
service-template-number
: Specifies the service-template number. The value ranges from 1 to 1024.
clear
: Sets the current service template type to
clear
, that is, data will be sent in clear text after the
template is mapped to an AP.
crypto
: Sets the current service template type to
crypto
, that is, data will be sent in cipher text after the
template is mapped to an AP.
Description
Use the
wlan service-template
command to create a new service template and to enter the
configuration view. If the input service template exists, then you can directly enter the configuration
view.
Use the
undo wlan service-template
command to delete the service template, and clear related
configurations. If the specified service template is mapped to radio, it can not be directly deleted before
mapping is removed.
By default, a clear-type service-template has been configured.
You cannot change the type of an existing service template. To do so, you must delete the existing
service template, and configure a new service template with the new type.
Examples
# Create a new service template
1.
<Sysname> system-view
[Sysname] wlan service-template 1 crypto
[Sysname-wlan-st-1]
wlan uplink-interface
Syntax
wlan uplink-interface interface-type interface-number
undo wlan uplink-interface interface-type interface-number
View
System view
Default Level
2: System level
