manualshive.com logo in svg

H3C WA Series, Command Reference Manual

Share
Download
H3C WA Series Command Reference Manual Download Page 75

 

9-13 

View 

System view 

Default Level 

2: System level 

Parameters 

interface-type interface-number

: Interface type and interface number. 

Description 

Use the 

wlan uplink-interface mesh-link

 command to configure a mesh-link radio interface as the 

uplink.  

Use the 

undo wlan uplink-interface mesh-link 

command to remove the configured uplink.  

By default, no radio interface is configured as an uplink interface. 

z

 

If only mesh-link radios are configured as uplinks and all the links are down, WLAN services on 

other radios will be stopped. 

z

 

If no uplinks are configured, WLAN service will be provided. 

z

 

A mesh-link radio interface cannot be configured as an uplink if no mesh profile is mapped to it. 

z

 

Unmapping a mesh profile from a radio that is configured as an uplink can be done only after the 

uplink configuration is removed from that radio. 

Examples 

# Configure the mesh-link radio interface as an uplink interface. 

<Sysname> system-view 

[Sysname] wlan uplink-interface mesh-link wlan-radio 1/0/1 

 

Summary of Contents for WA Series










































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands