10-5
<sysname> system-view
[sysname] interface WLAN-Radio 1/0/1
[sysname-WLAN-Radio1/0/1] radio-type dot11an
[sysname-WLAN-Radio1/0/1] channel band-width 20
client dot11n-only
Syntax
client dot11n-only
undo client dot11n-only
View
WLAN radio interface view
Default Level
2: System level
Parameters
None
Description
Use the
client dot11n-only
command to allow only 802.11n clients to access.
Use the
undo
client dot11n-only
command to restore the default.
Support for the command depends on the device model.
By default, an 802.11a/n radio permits both 802.11a and 802.11n clients to access, and an 802.11g/n
radio permits both 802.11b/g and 802.11n clients to access.
An 802.11n radio supports both 2.4 GHz and 5 GHz bands and thus can allow 802.11a/b/g stations to
access for good compatibility.
The client dot11n-only command prohibits non-802.11n clients from access. Therefore, if you want to
provide access for all 802.11a/b/g clients, you need to disable this command.
Examples
# Configure the radio to allow only 802.11n clients to access.
<sysname> system-view
[sysname] interface WLAN-Radio 1/0/1
[sysname-WLAN-Radio1/0/1] radio-type dot11an
[sysname-WLAN-Radio1/0/1] client dot11n-only
client max-count
Syntax
client max-count max-number
undo client max-count
View
WLAN service template view
Default Level
2: System level
