H3C UniServer R4300 G6, User Manual, Page: 430 / 542

199
1/1ADM/10 for the PMC storage controller might cause the RAID level to increase depending
on the number of the added drives.
•
To migrate RAID 1 to RAID 5, you cannot add drives directly to RAID 1. First migrate RAID 1 to
RAID 0, add drives, and then migrate RAID 0 to RAID 5.
Examples
# Migrate RAID 0 to RAID 5.
[root@localhost ~]# arcconf modify 1 from 0 to 305190 5 0 0 0 1 0 6 0 7
Controllers found: 1
Reconfiguration of a logical device is a long process. Are you sure you want to continue?
Press y, then ENTER to continue or press ENTER to abort: y
Reconfiguring logical device: LogicalDrv 0
Command completed successfully.
# View the migration process.
[root@localhost ~]# arcconf getconfig 1 ld
Controllers found: 1
----------------------------------------------------------------------
Logical device information
----------------------------------------------------------------------
Logical Device number 0
Logical Device name : LogicalDrv 0
Disk Name : /dev/sda
Block Size of member drives : 512 Bytes
Array : 0
RAID level : 5
Status of Logical Device : Optimal(Background Parity Initialization : 51 %)
Parity Initialization Status : In Progress
Size : 305190 MB
Stripe-unit size : 256 KB
Full Stripe Size : 768 KB
Interface Type : SATA SSD
Device Type : Data
Boot Type : None
Heads : 255
Sectors Per Track : 32
Cylinders : 65535
Caching : Enabled
Mount Points : Not Applicable
LD Acceleration Method : Controller Cache
Volume Unique Identifier : 600508B1001C7B7C4BBF3ACB01F885BC
--------------------------------------------------------
Array Physical Device Information
--------------------------------------------------------
Device 0 : Present (152627MB, SATA, SSD, Channel:0, Device:0)
CVPR1461036N160DGN
Device 1 : Present (1526185MB, SATA, SSD, Channel:0, Device:1)
PHDV624000FL1P6EGN
Device 6 : Present (457862MB, SATA, SSD, Channel:0, Device:6)
17501B83246B
Device 7 : Present (915715MB, SATA, SSD, Channel:0, Device:7)
18031A983BCA