Installation Manual
H3C S3100-52P Ethernet Switch
Chapter 3 Installing the Switch
3-3
3) Place the switch horizontally in a proper position, and fix the other end of mounting
ears to the front brackets with screws and captive nuts, as shown in Figure 3-3.
Front panel
Fr
Front square-holed
Front
mounting ear
ont mounting ear
bracket
Front panel
Fr
Front square-holed
Front
mounting ear
ont mounting ear
bracket
Figure 3-3
Fix front mounting ears (2)
III. Use front mounting ears and a tray
Follow these steps to install a switch into a 19-inch standard cabinet:
1) Wear an ESD-preventive wrist strap to check the grounding and stability of the
cabinet.
2) Fix the delivered tray horizontally in a proper position.
3) Take out the screws which are packed together with the front mounting ears, and
fix one end of mounting ears to the switch, as shown in Figure 3-2.
4) Place the switch on the tray horizontally, slide the tray into the cabinet, and fix the
other end of mounting ears to the front brackets with crews and captive nuts, as
shown in Figure 3-3.
IV. Use front mounting ears and guide rails
z
Introduction to guide rail
Figure 3-4 shows the appearance of a guide rail.
