Installation Manual
H3C S3100-52P Ethernet Switch
Chapter 1 Product Overview
1-5
Attribute
Description
Service
z
Connection to the ASCII terminal
z
Connection to the serial interface of a local terminal
(a PC for example) or to a remote terminal (through
a pair of modems), where terminal emulation
program is run
V. Attributes of the 1000 Mbps SFP ports
The S3100-52P Ethernet switch provides four gigabit SFP interfaces (numbered 49 to
52) on its front panel. You can choose SFP modules as needed. The available SFP
modules are listed in Table 1-5. Enough available SFP modules and their hot
swappable feature allow you to do networking more flexibly.
Table 1-5
SFP modules supported by the S3100-52P Ethernet switch
Item
Specific model
Gigabit SFP modules
z
SFP-GE-SX-MM850-A
z
SFP-GE-LX-SM1310-A
z
SFP-GE-LH40-SM1310
z
SFP-GE-LH40-SM1550
z
SFP-GE-LH70-SM1550
Electrical port SFP
module
SFP-GE-T
SFP
modules
Gigabit BIDI modules
z
SFP-GE-LX-SM1310-BIDI
z
SFP-GE-LX-SM1490-BIDI
Note:
z
For specifications of each SFP module, refer to
H3C Low-End Series Ethernet
Switches Pluggable modules manual
.
z
The available SFP modules may change as time goes by. For the updated
information about SFP modules, ask H3C marketing or technical support personnel.
1.2.2 Rear Panel
The S3100-52P Ethernet switch has an AC power socket and a grounding screw on its
rear panel, as shown in Figure 1-2.
