Installation Manual
H3C S3100-52P Ethernet Switch
Chapter 4 Starting up the Switch at the Initial Boot
4-3
z
Parity check = none
z
Stopbit = 1
z
Flow control = none
Figure 4-4
Setting communications parameters
Step 4: Click <OK>. The HyperTerminal dialogue box appears, as shown in Figure 4-5.
Figure 4-5
HyperTerminal window
In the HyperTerminal dialogue box, select [File/Properties]. The Properties dialog box
appears. In the Properties dialog box, select the Settings tab, as shown in Figure 4-6.
Select VT100 or Auto detect in the Emulation dropdown menu. Click <OK>.
