Installation Manual
H3C S5600 Series Ethernet Switches
Chapter 4 Starting up the Switch at the Initial Boot
4-2
Figure 4-2
Setting up a new connection
Step 2: Enter the name of the new connection in the Name field and click <OK>. The
dialog box, as shown in Figure 4-3 displays.
Step 3: Select the serial port to be used from the Connect Using dropdown menu. The
serial port must be the same port connected by the console cable.
Figure 4-3
Setting the connection port
Step 5: Click <OK>. The Port Settings tab, shown in Figure 4-4, appears and you can
set serial port parameters. Set the following parameters:
z
Baud rate = 9600
z
Databit = 8
z
Parity check = none
