Installation Manual
H3C S5600 Series Ethernet Switches
Chapter 3 Installing the Switch
3-9
Rear panel
Guide
rail
Figure 3-14
Effect diagram of front mounting ear and guide rail installation
Note:
Ensure a clearance of 1U (44.45 mm, namely, 1.75 inches) between devices for the
purpose of heat dissipation.
3.2 Mounting the Switch on a Tabletop/Workbench
When placing the switch on a tabletop or workbench, you simply need to:
z
Make sure that the tabletop or workbench is clean, flat, and sturdy.
z
Allow 10 cm (3.9 in.) of clearance around the sides of the chassis.
z
Do not place heavy objects on the switch.
