Installation Manual
H3C S5600 Series Ethernet Switches
Chapter 3 Installing the Switch
3-7
Front panel
Screw 1
Rear
mounting ear
Front square-holed bracket
Front mounting ear
Screw 1: Load-bearing screw
Figure 3-10
Effect diagram of front and rear mounting ear installation (2)
3.1.5 Use front mounting ears and guide rails
Follow these steps to install a switch into a 19-inch standard cabinet
1) Wear an ESD-preventive wrist strap to check the grounding and stability of the
cabinet.
2) Take out the screwed packed together with the front mounting ears and fix one
end of the front mounting ears to the switch, as shown in Figure 3-11.
Front panel
Figure 3-11
Fix front mounting ears
3)
Install guide rails on the brackets on both sides of the cabinet with M5 self-tapping
screws, as shown in Figure 3-12.