Installation Manual
H3C S5600 Series Ethernet Switches
Chapter 1 Product Overview
1-15
1.7 Expansion Module
The S5600 Series Ethernet switches provide one expansion module slot on the rear
panel. The expansion mode that can be used in this slot includes 8-port 1000 Mbps
SFP module, 1-port 10 Gbps XENPAK module, and 2-port 10 Gbps XFP module.
I. 8-port 1000 Mbps SFP module
(1) Port status LEDs
(2) SFP ports
(3) Module power LED
Figure 1-6
8-port 1000 Mbps SFP module
This module provides eight 1000 Mbps SFP external optical/electrical ports.
z
For an optical port, you can choose one of the following SFP modules according to
your needs.
Table 1-10
Optical port module supported by 8-port 1000 Mbps SFP module
SFP module
Central wavelength
Fiber specifications
Maximum transmission distance
SFP-GE-SX-MM850-A
SFP-GE-LX-SM1310-A
SFP module
1000M SFP module
SFP-GE-LH40-SM1310
Note:
z
The types of SFP modules may vary with time. Consult H3C marketing personnel or
technical support personnel to obtain the latest information about SFP modules.
z
For specifications of SFP modules, refer to
H3C Low End Series Ethernet Switches
Pluggable Module Manual
.
z
For an RJ-45 electrical port with the transmission distance is 100 m (328 ft), you
can select the RJ-45 connector as shown in the following figure, and the
category-5 twisted pair as the data transmission medium.