17
To set the MAC Information mode:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Set the MAC Information
mode.
mac-address information mode
{
syslog
|
trap
}
The default setting is
trap
.
Setting the MAC change notification interval
To prevent syslog messages or SNMP notifications from being sent too frequently, you can set the
MAC change notification interval to a larger value.
To set the MAC change notification interval:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Set the MAC change
notification interval.
mac-address information
interval interval-time
The default setting is 1 second.
Setting the MAC Information queue length
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Set the MAC Information
queue length.
mac-address information
queue-length value
The default setting is 50.
MAC Information configuration example
Network requirements
Enable MAC Information on interface GigabitEthernet 1/0/1 on Device in
address changes in syslog messages to the log host, Host B, through interface GigabitEthernet
1/0/2.
Figure 4 Network diagram
Host A
192.168.1.1/24
Host B
192.168.1.2/24
Server
192.168.1.3/24
GE1/0/1
GE1/0/2
GE1/0/3
Device
Summary of Contents for H3C S7500E-X
Page 70: ...57 ...
