194
Step Command
Remarks
6.
Configure a priority
marking action for SVLAN
tags.
•
Replace the priority in the SVLAN tags
of matching frames with the configured
priority:
remark
dot1p
dot1p-value
•
Copy the 802.1p priority in the CVLAN
tag to the SVLAN tag:
remark dot1p customer-dot1p-trust
N/A
7.
Return to system view.
quit
N/A
8.
Create a QoS policy and
enter QoS policy view.
qos policy
policy-name
N/A
9.
Associate the traffic class
with the traffic behavior in
the QoS policy.
classifier
classifier-name behavior
behavior-name
N/A
10.
Return to system view.
quit
N/A
11.
Enter Layer 2 Ethernet
interface view.
interface
interface-type interface-number
N/A
12.
Configure the port to trust
the 802.1p priority in
incoming frames.
qos trust dot1p
By default, the device
does not trust the priority
carried in frames.
This step is required only
if the
remark
dot1p
command is configured.
13.
Enable QinQ.
qinq enable
N/A
14.
Apply the QoS policy to
the inbound direction of
the port.
qos apply policy
policy-name
inbound
N/A
For more information about QoS policies, see
ACL and QoS Configuration Guide
.
Displaying and maintaining QinQ
Execute
display
commands in any view.
Task
Command
Display QinQ-enabled ports.
display qinq
[
interface interface-type
interface-number
]
Summary of Contents for H3C S7500E-X
Page 70: ...57 ...
