manualshive.com logo in svg

H3C H3C S7500E-X, Configuration Manual

Introducing the H3C H3C S7500E-X, a cutting-edge networking product engineered to streamline your operations. Unlock its full potential with the comprehensive Command Reference Manual, available for free download from our manualshive.com. Equip yourself with an in-depth manual to maximize the benefits of this exceptional product.

Share
Download
background image

 

270 

configuring Layer 3 Ethernet link aggregation 
group (dynamic), 31 
configuring Layer 3 Ethernet link aggregation 
group (static), 29 
configuring Layer 3 Ethernet link aggregation 
load sharing, 50 
configuring LLDP, 223, 239 
configuring LLDP (CDP-compatible), 244 
configuring LLDP 802.1p-to-local priority 
mapping, 236 
configuring LLDP advertisable TLVs, 226 
configuring LLDP APP parameters, 234 
configuring LLDP basics, 224, 239 
configuring LLDP CDP compatibility, 231 
configuring LLDP DCBX, 232, 245 
configuring LLDP ETS parameters, 236 
configuring LLDP group-based WRR 
queuing, 237 
configuring LLDP management address, 228 
configuring LLDP management address 
encoding format, 228 
configuring LLDP PFC parameters, 238 
configuring LLDP trapping, 238 
configuring LLDP-MED trapping, 238 
configuring loop detection, 109, 111 
configuring MAC address move 
notification, 11, 11 
configuring MAC address move 
suppression, 11, 11 
configuring MAC address table, 2, 14 
configuring MAC address table entry, 3 
configuring MAC address table frame 
forwarding rule (on interface), 7 
configuring MAC address table multiport 
unicast entry (global), 4 
configuring MAC address table multiport 
unicast entry (on interface), 5 
configuring MAC Information, 17 
configuring MAC-based VLAN, 121, 130 
configuring MAC-based VLAN dynamic 
assignment, 124 
configuring MAC-based VLAN server 
assignment, 125 
configuring MAC-based VLAN static 
assignment, 123 
configuring MST region, 75 
configuring MST region max hops, 77 
configuring MSTP, 74, 99 
configuring MVRP, 175, 178 
configuring MVRP registration mode, 176 
configuring MVRP timer, 177 

configuring port isolation (multiple isolation 
groups), 55 
configuring port-based VLAN, 117, 128 
configuring private VLAN, 143, 146 
configuring private VLAN promiscuous port, 146 
configuring private VLAN trunk promiscuous 
port, 148 
configuring private VLAN trunk 
promtrunk secondary port, 152 
configuring protocol-based VLAN, 126, 133 
configuring PVST, 73, 103 
configuring QinQ, 195 
configuring QinQ basics, 195 
configuring QinQ CVLAN TPID, 192 
configuring QinQ SVLAN TPID, 193 
configuring QinQ VLAN transparent 
transmission, 191, 197 
configuring RSTP, 72 
configuring secondary VLAN Layer 3 
communication, 155 
configuring service loopback group, 252, 252 
configuring spanning tree, 72, 99 
configuring spanning tree BPDU guard, 94 
configuring spanning tree BPDU transmission 
rate, 80 
configuring spanning tree device priority, 77 
configuring spanning tree Digest Snooping, 88 
configuring spanning tree edge port, 81 
configuring spanning tree No Agreement 
Check, 90, 92 
configuring spanning tree port link type, 85 
configuring spanning tree port mode for MSTP 
packets, 86 
configuring spanning tree port path cost, 81, 84 
configuring spanning tree port priority, 85 
configuring spanning tree port role restriction, 96 
configuring spanning tree protection features, 94 
configuring spanning tree root bridge, 76 
configuring spanning tree root bridge (device), 76 
configuring spanning tree secondary root 
bridge, 76 
configuring spanning tree secondary root bridge 
(device), 77 
configuring spanning tree switched network 
diameter, 78 
configuring spanning tree TC Snooping, 92 
configuring spanning tree TC-BPDU transmission 
restriction, 96 
configuring spanning tree timeout factor, 80 
configuring spanning tree timer, 78 
configuring STP, 72 
configuring super VLAN, 137, 137, 139 

Summary of Contents for H3C S7500E-X



































































































































































































































































































Reviews:

No comments

Related manuals for H3C S7500E-X

ABB RELION REF615R Manual preview
RELION REF615R
Brand: ABB Pages: 66
Maco Standard Fitting Instructions Manual preview
Standard
Brand: Maco Pages: 38
8e6 Technologies Enterprise Filter Authentication R3000 Quick Start Manual preview
Enterprise Filter Authentication R3000
Brand: 8e6 Technologies Pages: 66
Zenith Data Systems Z-100 Series Installation Manual preview
Z-100 Series
Brand: Zenith Data Systems Pages: 64
National Instruments NI WLS/ENET-9163 User Manual preview
NI WLS/ENET-9163
Brand: National Instruments Pages: 36
Longshine LCS-8131G3 User Manual preview
LCS-8131G3
Brand: Longshine Pages: 27
NEC Thin Client US310e Getting Started preview
Thin Client US310e
Brand: NEC Pages: 6
ATI Technologies RADEON 9800 PRO Getting Started Manual preview
RADEON 9800 PRO
Brand: ATI Technologies Pages: 20
ADTRAN NetVanta Serial Dial Backup Interface Module (DIM) none Quick Start Manual preview
NetVanta Serial Dial Backup Interface Module (DIM) none
Brand: ADTRAN Pages: 2
Sony Ericsson Developer's Board Manual preview
Developer's Board
Brand: Sony Ericsson Pages: 28
JETWAY LI22 Series User Manual preview
LI22 Series
Brand: JETWAY Pages: 63
Alcatel-Lucent Service Aggregation Router 7705 Installation Manual preview
Service Aggregation Router 7705
Brand: Alcatel-Lucent Pages: 20
XtendLan XL-VC102SB User Manual preview
XL-VC102SB
Brand: XtendLan Pages: 17
Primera DUP-11 User Manual preview
DUP-11
Brand: Primera Pages: 82
Idis DR-8416 Quick Manual preview
DR-8416
Brand: Idis Pages: 40
Patton electronics OnSite 9100 Quick Start Manual preview
OnSite 9100
Brand: Patton electronics Pages: 8
Altronix NetWay8GL Installation Manual preview
NetWay8GL
Brand: Altronix Pages: 8
Adaptec 2025ZCR - SCSI RAID Storage Controller Datasheet preview
2025ZCR - SCSI RAID Storage Controller
Brand: Adaptec Pages: 2

Brands by name

Popular brands

Load more brands