manualshive.com logo in svg

H3C H3C S7500E-X, Configuration Manual

Introducing the H3C H3C S7500E-X, a cutting-edge networking product engineered to streamline your operations. Unlock its full potential with the comprehensive Command Reference Manual, available for free download from our manualshive.com. Equip yourself with an in-depth manual to maximize the benefits of this exceptional product.

Share
Download
background image

 

123 

When you configure dynamic MAC-based VLAN assignment, follow these guidelines: 

•

 

When a port joins a VLAN specified in the MAC-to-VLAN entry, one of the following events 
occurs depending on the port configuration: 

{

 

If the port has not been configured to allow packets from the VLAN to pass through, the port 
joins the VLAN as an untagged member. 

{

 

If the port has been configured to allow packets from the VLAN to pass through, the port 
configuration remains the same. 

•

 

If you configure both static and dynamic MAC-based VLAN assignments on a port, dynamic 
MAC-based VLAN assignment takes effect. 

•

 

The 802.1p priority of the VLAN in a MAC-to-VLAN entry determines the transmission priority of 
the matching packets. 

Server-assigned MAC-based VLAN 

Use this feature with access authentication, such as MAC-based 802.1X authentication, to 
implement secure and flexible terminal access. 

To implement server-assigned MAC-based VLAN, perform the following tasks: 

1. 

Configure the server-assigned MAC-based VLAN feature on the access device. 

2. 

Configure username-to-VLAN entries on the access authentication server. 

When a user passes authentication of the access authentication server, the server assigns the 
authorization VLAN information for the user to the device. The device then performs the following 
operations: 

3. 

Generates a MAC-to-VLAN entry by using the source MAC address of the user packet and the 
authorization VLAN information. The authorization VLAN is a MAC-based VLAN. 
The generated MAC-to-VLAN entry cannot conflict with the existing static MAC-to-VLAN 
entries. If a confliction exists, the dynamic MAC-to-VLAN entry cannot be generated. 

4. 

Assigns the port that connects the user to the MAC-based VLAN. 

When the user goes offline, the device automatically deletes the MAC-to-VLAN entry and removes 
the port from the MAC-based VLAN. For more information about 802.1X and MAC authentication, 
see 

Security Configuration Guide

. 

General configuration restrictions and guidelines 

When you configure MAC-based VLANs, follow these restrictions and guideline: 

•

 

Do not configure a VLAN as both a super VLAN and a MAC-based VLAN. 

•

 

The MAC-based VLAN feature is mainly configured on downlink ports of user access devices. 
Do not use this feature with link aggregation. 

•

 

EVB is not supported on a port that is enabled with the MAC-based VLAN feature. For more 
information about EVB, see 

EVB Configuration Guide

. 

Configuring static MAC-based VLAN assignment 

Step Command  Remarks 

1. 

Enter system view.

 

system-view 

N/A 

2. 

Create a MAC-to-VLAN 
entry. 

mac-vlan mac-address

 

mac-address 

[

 mask mac-mask

 ] 

vlan vlan-id 

[

 dot1q priority

 ] 

By default, no MAC-to-VLAN 
entry exists. 

3. 

Enter Layer 2 Ethernet 
interface view. 

interface

 

interface-type 

interface-number

 

N/A 

Summary of Contents for H3C S7500E-X



































































































































































































































































































Reviews:

No comments

Related manuals for H3C S7500E-X

Commell ES-270 User Manual preview
ES-270
Brand: Commell Pages: 36
Quectel Wi-Fi-M.2 EVB User Manual preview
Wi-Fi-M.2 EVB
Brand: Quectel Pages: 23
Bridgeworks a204 Hardware Manual preview
a204
Brand: Bridgeworks Pages: 18
S&T kontron KBox E-420-R1K/V1K User Manual preview
kontron KBox E-420-R1K/V1K
Brand: S&T Pages: 82
TVT Digital TD-3316B4-16P-A1 Quick Start Manual preview
TD-3316B4-16P-A1
Brand: TVT Digital Pages: 2
A4Tech RH-10 User Manual preview
RH-10
Brand: A4Tech Pages: 8
ZKTeco HVR0402 User Manual preview
HVR0402
Brand: ZKTeco Pages: 68
Dahua NVRPRO User Manual preview
NVRPRO
Brand: Dahua Pages: 113
Intel 500 - DATASHEET REV 003 Datasheet preview
500 - DATASHEET REV 003
Brand: Intel Pages: 67
B&B Electronics 232PCC User Manual preview
232PCC
Brand: B&B Electronics Pages: 17
M-system M5XSBS Instruction Manual preview
M5XSBS
Brand: M-system Pages: 4
H3C SecPath F50X0 Series Manual preview
SecPath F50X0 Series
Brand: H3C Pages: 41
Camozzi UVIX Use And Maintenance Manual preview
UVIX
Brand: Camozzi Pages: 22
ICP GDT6618RD Addendum preview
GDT6618RD
Brand: ICP Pages: 111
BenQ QCast User Manual preview
QCast
Brand: BenQ Pages: 38
ekwb EK-Quantum Vector FE RTX 3080 User Manual preview
EK-Quantum Vector FE RTX 3080
Brand: ekwb Pages: 20
Adaptec 2025ZCR - SCSI RAID Storage Controller Datasheet preview
2025ZCR - SCSI RAID Storage Controller
Brand: Adaptec Pages: 2
NEC QB-MINI2 User Manual preview
QB-MINI2
Brand: NEC Pages: 170

Brands by name

Popular brands

Load more brands