Operation Manual – System Maintenance and Debugging
H3C S5600 Series Ethernet Switches
Chapter 2 Basic System Configuration
and Debugging
2-3
OFF
ON
OFF
ON
Debugging
information
Protocol
debugging
switch
Screen
output
switch
1
3
1
2
3
OFF
ON
ON
1
3
1
2
3
1
3
Debugging
information
Screen
output
switch
Protocol
debugging
switch
Figure 2-1
The relationship between the protocol and screen debugging switch
Note:
Displaying debugging information on the terminal is the most commonly used way to
output debugging information. You can also output debugging information to other
directions. For details, refer to
Information Center Operation
.
You can use the following commands to enable the two switches.
Follow these steps to enable debugging and terminal display for a specific module:
To do…
Use the command…
Remarks
Enable system debugging
for specific module
debugging
module-name
[
debugging
-
option
]
Required
Disabled for all modules
by default.
Enable terminal display
for debugging
terminal debugging
Required
Disabled by default.
Caution:
The output of debugging information affects the system operation. Disable all
debugging after you finish the system debugging.
